Czech Digital Innovation Hubs: who are they and how can they help?

Photo by RICAIP.eu

By Tereza Šamanová

In the Czech Republic, the initial network of Digital Innovation Hubs (DIHs) in 2016 was very small – it included only two pioneer hubs raised from Horizon 2020 European projects focused on support of digital manufacturing (DIGIMAT located in Kuřim was the first one) and high-performance computing (the National Supercomputing Centre IT4Innovations located in Ostrava was the first DIH registered in CZ). Since then, the Czech network has enlarged up to twelve DIHs and their specialisation varies from manufacturing, cybersecurity, artificial intelligence, robotics, high-performance computing up to sectoral focus such as agriculture and food industry, health or smart cities and smart regions development.

Nowadays you can find at least one DIH in each region of the Czech Republic:

Source: https://s3platform.jrc.ec.europa.eu

How are the Czech DIHs built and structured? They are based often on a leading competence centre, research organisation, technical university, science park, technology centre or the most active innovations-supporting NGOs who have created an efficient consortium of other partners around them, always following the selected field of specialisation. The DIHs in Czechia, as well as all over the Europe, have not been built “on a green meadow” – as we say in Czech, but based on a record of projects, activities and common references that have created the optimal mixture of the DIH`s expertise and capacities. The scheme developed by TNO in 2015 illustrates the typical position of a DIH as an “orchestrator” and cross-point of the regional activities focused on development and implementation of digital innovation:

Photo by DIH-HERO.EU

In 2021, based on the Digital Europe Programme, there were – among the existing DIHs and other players – a selection of an initial network of European Digital Innovation Hubs – DIHs with European relevance, serving not only clients coming from their region and/or country, but providing also cross-border services in the field of their specialisation.

The basic services of DIHs and European DIHs do not differ too much, their principal difference lies in the European and cross-border nature of their services. Therefore, when it comes to the arrangement of services of a standard DIH, you can imagine the mixture of different ingredients that together make a Digital Innovation Hub as a “satellite” published in 2019 by the European Commission:

Source: https://digital-strategy.ec.europa.eu/en/activities/edihs

How do DIHs in the Czech Republic cope with the mission to help SMEs and public organisations with their digitalisation?

  • Explaining that advanced digitalisation means working with data and sophisticated interconnection of people, devices, and technologies, not simply transferring paper or analogue-based data to digital ones.
  • Organising common events – regional roadshows, awareness raising activities and brainstorming among Czech DIHs to update information at national level on advanced digitalisation, and sharing examples of best practices.
  • Sharing information about projects and recommending them to the appropriate beneficiaries with the objective of creating the most added value for the national innovative ecosystem.
  • Attracting traditional non-tech SMEs and smaller public organisations and communities (i.e., farmers and/or service providers) to communicate with DIHs so they can offer them a starting plan of digitalisation in an appropriate way.
  • Including all the new players (those who are interested in creating a DIH or cooperating with an existing one) inside the Czech DIH community and Central European Platform for Digital Innovations – CEEInno, organising an annual overview of Czech Digital Innovation Hubs and regular meetings for Czech DIHs, always with the support of our Ministry of Industry and Trade as the governmental manager of DIHs.

Photo by CEEInno

How can Czech DIHs become useful for foreign partners, especially operating in the field of robotics or interested in some of the sectors, i.e., agriculture?

  • Identifying relevant partners for your project in the Czech Republic (CZ) and bordering countries. Foreign partners will be able to cooperate not only with the Czech Digital Innovation Hubs, but also with the DIHs and other players of the surrounding countries within our Central European Platform for Digital Innovations, CEEInno.
  • Providing all the DIH services to clients not only from CZ, we are strengthening our forces in the near future under the Digital Europe Programme and within the European Digital Innovation Hubs initial network.
  • Helping to contact Czech SMEs and public organisations, through members and cooperating organisations of the CEEInno Platform.
  • Organising, co-organising or hosting your project if you intend to attract the Czech participants.

Photo by RICAIP.EU

Among relevant projects of the Czech DIHs focused on robotics and agro-robotics, there could be pointed out the following:

  • RICAIP (Research and Innovation Centre on Advanced Industrial Production), which as an international distributed research centre of excellence focusing on research in robotics and artificial intelligence. The project includes Czech and German partners, being hosted at CIIRC CTU and National Centre for Industry 4.0 as one of the Czech DIHs. Its aim is to strengthen research in industrial production and to connect robotic and AI testbeds in Prague, Brno and Saarbrücken.
  • Smart Agri Hub CZ-SK (AgriHub made in CzechoSlovakia), joining eight Czech and Slovak partners on common project aiming to promote digital innovation in the agri-food domain and to facilitate set-up and realisation of Innovation Experiments (IEs) in the region. Activities such as innovative hackathons, matchmaking activities for partners from different sectors and awareness raising events will take place within forthcoming year, the international community (not only from CZ and SK) is invited to participate as well.

If you would like to know more about the Czech Digital Innovation ecosystem you can contact me, Tereza Šamanová (LinkedIn, email), DIHNET Ambassador and informal coordinator of the “Czech DIHs Community” in the DIHNET community platform.

Winners of the DIH Champions Challenge 2020 revealed at the #EDIH2021 conference

Photo by Luxinnovation

On the 27th of January, DIHNET revealed the winners of the 2020 DIH Champions Challenge at the virtual EDIH Conference 2021 “Gearing up towards European Digital Innovation Hubs”. The awards ceremony gathered more than 1176 participants including Digital Innovation Hubs, designated EDIHs, regions and Member States, representatives of EEN, Clusters, SME associations, among other stakeholders.

DIHNET.EU was pioneer in launching the annual DIH Champions Challenge for identifying mature Digital Innovation Hubs in Europe. Begoña Sanchez, Innovation Systems and Policies manager at Tecnalia, and member of the DIHNET consortium, explains that the main purpose of this initiative is “to provide the DIHs community with a process for identifying good practices, showcase and support success stories of Mature DIHs that can inspire and guide other DIHs in their development.”

In this second edition, four DIHs were shortlisted as finalists: the am-LAB, the Basque Digital Innovation Hub (BDIH), the FZI Research Center for Information Technology and the ITI Data Hub (The Data Cycle Hub). The DIHNET consortium revised the proposals with the contribution of two external evaluators: Jan Kobliha, Ministerial Counsellor at the Ministry of Industry and Trade of the Czech Republic, and Thorsten Huelsmann, manager of the Digital Hub Logistics Dortmund, winner of the 2019 DIH Champions Challenge. “The different applications from the DIHs have once again demonstrated that the different approaches and structures of DIHs in Europe are diverse and heterogeneous as the European regions and members states are. Each application has shown an individual service and format portfolio, governance structure and operations model which fits to the requirements of the customers in the innovation or digital transformation value chain” explains Thorsten. Jan Kobliha, external evaluator in both contests, adds that “this year the proposals were more mature and the results of the top ones were comparable to each other, which is a huge difference to last year, where we had one absolute champion. In Europe there is a huge increase of DIH projects, some of them aspiring to become a EDIH and they have gained more experience”.

The 2020 DIH Champions Challenge winners are two Digital Innovation Hubs that have demonstrated a leading level of maturity: the am-LAB (Hungary) and the Basque Digital Innovation Hub (Spain).

From DIHNET we want to congratulate both winners – am-LAB and the Basque DIH – for this great achievement, and also to the two finalists ITI Data Hub and the FZI Research Center for Information Technology. We hope other Digital Innovation Hubs see them as a source of inspiration for the future.

Meet the finalists

am-LAB
Located in the West Pannon region of Hungary, the am-LAB is the daughter company of Pannon Business Network Association – PBN. This DIH promotes and assists digitisation of SMEs in Western Hungary and works as an anchor of the regional digitisation initiatives in SME manufacturing. The local innovation technology transfer network has strong organically developed relations. Members of the hub are the local university – ELTE Multidisciplinary Science Network, local manufacturing companies and a cluster of mechatronic manufacturing SMEs. The regional government is also supporting and closely following the progress of the DIH. http://www.amlab.hu/

Basque Digital Innovation Hub (BDIH)
The Basque Digital Innovation Hub (BDIH) is a non-for-profit initiative that provides European industrial fabric -especially Basque SMEs- an easy and cost-efficient access to innovative and excellent scientific-technological capabilities required to meet the challenges of the Industry 4.0 in the Advanced Manufacturing environment. This DIH located in Spain consists of a digitally-linked network of R+D infrastructures, pilot plants and specialised know-how in 6 different areas: Additive Manufacturing, Flexible and Collaborative Robotics, Cybersecurity, Big Data Analytics, Smart and Connected Machines and New Materials.
http://www.spri.eus/en/basque-industry/basque-digital-innovation-hub/

FZI Research Center for Information Technology
The FZI Research Center for Information Technology at the Karlsruhe Institute of Technology, Germany, is a non-profit institution for applied research in information technology and technology transfer. Its task is to provide businesses and public institutions with the latest research findings in information technology. It also qualifies young researchers for their career in academics or business as well as self-employment. http://www.fzi.de/en/home/

ITI Data Hub (The Data Cycle Hub)
The Data Cycle Hub has a non-for-profit aim and is coordinated and led by ITI, also a non-for-profit Research Centre and a reference on Big Data and Artificial Intelligence in the Valencia region, Spain. The objective of this DIH is to bridge the gap between research and industry, specifically SMEs, providing innovative solutions and services that require advanced data analytics, automatic learning and artificial intelligence. The Data Cycle Hub addresses primarily Big Data and Artificial Intelligence, but also other key digital enabling technologies like Cyber Physical Systems, IoT, Cloud and High-Performance Computing Platforms or statistics optimisation. https://thedatacyclehub.com/en/

To know more about these Digital Innovation Hubs visit their respective websites and the JRC DIH catalogue: https://s3platform.jrc.ec.europa.eu/digital-innovation-hubs-tool


Note from the Managing Editor: This post has been merged from this article and this article.